What requirements need to be met for the use of the slitting machineThe use of the slitting machine requires us to roughly understand, we also have to meet some require...
READ MORE »16. March, 2024
The development of slitting machine has these favorable conditionsThe development of the slitting machine in the market is still very good, we know that its use has a...
READ MORE »15. March, 2024
Talking about the fixed-length specification of the slitting machineWe know that there are a lot of specifications for the use of slitting machines, among which we need...
READ MORE »14. March, 2024
The quality problem of the interface of the film slitting machineBecause the poor interface will cause quality problems such as broken film or wrinkle during the use...
READ MORE »13. March, 2024
What matters should be paid attention to for the slitting machineThe use of slitting machine slitting effect is still very good, which for the attention of the knife...
READ MORE »12. March, 2024
What problems will the slitter encounter in the purchaseWe know that the effect of slitter is still very good, in the purchase we need to pay attention to a...
READ MORE »11. March, 2024
How to judge the quality of the slitterThe slitter machine is mainly for the slitter effect of paper, we know that its use for quality judg...
READ MORE »09. March, 2024
What should I do if the color circle appears on the end face of the film roll after slitting and windingWhat is the color ring of the film slitterThe color ring is due to a certain degree of pollution ins...
READ MORE »08. March, 2024
What causes scratches and indentations on the film roll of the slitter?Film slitting machine scratchScratches are the appearance quality problem of the film, which directl...
READ MORE »07. March, 2024
How to deal with burrs and warped edges of film scutters1. Rough edge of the film slitterMost of the raw edge is caused by the cutting knife is too blunt, r...
READ MORE »06. March, 2024
The causes and countermeasures of slitter deviationScuttling machine deviation refers to the phenomenon that part of the film on the end face of the fi...
READ MORE »05. March, 2024
Extrusion slitting in slitting machineThe slitting machine can be roughly divided into three ways in the slitting process: flat knife slit...
READ MORE »04. March, 2024