Home»News

Slitting machine standard operation manual

30. May, 2024|delish|0Views

Slitting machine standard operation manual

Slitting machine is a kind of mechanical equipment that slits wide paper, mica tape or film into multiple narrow strips, and is commonly used in papermaking machinery, wire and cable mica tape and printing and packaging machinery.

Slitting machine standard operation manual:

1. The slitting machine sets the shutdown and deceleration parameters and starts the equipment. Use the P1 function of the color counter to set the distance from the label, and the actual distance value should be × 2 when setting. After the machine is stopped, use a ruler to measure the error distance of the upper and lower color scales.

2. Press the benchmarking button again, the slitting machine will automatically return the label according to the memory data, after the end of the label withdrawal action, move the lower photoelectric switch to the middle position of the color mark, and adjust the sensitivity of the photoelectric switch to complete.

3. Build according to the settings, and the color code will be automatically aligned according to the set value. Move the slitting machine to the right end of the benchmarking switch, start the equipment to complete a roll, if there is an error, just move the photoelectric switch accordingly. For example, if the color scale of the next layer exceeds the color scale of the upper layer by 5 mm, you only need to move it down by 5 mm.