Home»News

What are the operating process requirements of the slitting machine

23. October, 2023|delish|0Views

If the slitting machine is not used for a long time, all the bright surfaces must be wiped clean, coated with anti-rust oil, and covered with a plastic sleeve to cover the whole machine. So do you know what are the process requirements for operating the slitting machine?

What are the operating process requirements of the slitting machine

Process requirements for operating the slitting machine:

1. Fixed length slitting control is divided into two types: static and dynamic slitting: accurate shutdown when the set length arrives, then static slitting processing, and restart operation after slitting.

2. The slitting machine should carry out fixed-length slitting processing of the whole roll or whole raw materials, and the slitting processing of plastic packaging materials, packaging cartons, wood chips, etc., must use fixed-length slitting control.

3. The slitting length can be set continuously, if the actual slitting length has errors, it is easy to calibrate by setting parameters.

4. The most important performance index of fixed-length slitting is the slitting accuracy, and the length consistency of the finished product is good.

The use of slitting machine is completed by longitudinal slitting machine and cross-cutting machine, so high-quality longitudinal cutting knives and cross-cutting knives should be used. When we all operate and use the slitting machine, we all need to install the above process to operate.