Home»News

Introduction to the performance characteristics of automatic slitting machine

08. September, 2023|delish|0Views

Nowadays, the continuous development of society, automation equipment has been frequently used in people's life and work, I believe that over time, this frequency will be greater expansion, today Xiaobian and you talk about the automation of slitting machine, mainly around the performance characteristics of automatic slitting machine to make the following introduction.

Automatic slitting machine is a kind of wide paper or film slitting into multiple narrow material mechanical equipment, often used in paper machinery and printing and packaging machinery, using advanced servo control system, the whole line of production linkage performance is stable, optimized tension full closed-loop follow-up control system, more stable operation, and adopt the axial positioning device of the roll cloth axis, the surface of the slitting end is neat and uneven during production; Simplified operation, less labor, low energy consumption, always pay attention to operating costs.

The automatic slitting machine focuses on solving the following problems:

1. The cloth tension is not stable, and the cloth surface in the process of starting and stopping has the phenomenon of closing and touching the ground, which is easy to cause a decrease in the production rate and an increase in waste.

2. The tool is labor-intensive and time-consuming, reduces the equipment operation efficiency, and the output rate is not high.

3. The tightness of the cloth roll is uneven inside and outside, there is a convex cap phenomenon, and even often inverted during operation, resulting in a stop.

4. The sense of layering of the end face of the cloth roll is too strong, the width exceeds the regulations, and the quality of slitting decreases.

5. The offcuts cannot be further reduced, resulting in increased costs and a decrease in the production rate.

6. Reduce the labor intensity of workers, reduce the time cost of intermediate links, and improve production efficiency and capacity.