Description of the development of the slitting machine

23. May, 2024|delish|0Views

Description of the development of the slitting machine

The slitting machine is mainly for paper, textile and other materials for slitting operations, many factories can also see the figure of the slitting machine, it is filled in the mission gap or film slitting into a moment, changing the excitation current can change the magnetic condition of the magnetic particle, and then adjust the transmitted torque. It can be used for stepless speed regulation from zero initial to synchronous speed, and is suitable for high-speed section fine-tuning and small and medium-power speed regulation system. With the development of society, there are more and more factories using slitting machines, so let's talk about the development of slitting machines.

With the development of science and technology, servo drive skills and other compositions. It is to cut the raw material into a number of independent units, its mission principle is to fix the raw material on the discharging shaft at one end equipped with a magnetic particle tension manipulator to stabilize the tension required for the raw material, and then through a pair of rubber rollers to pull the raw material, the slitting machine through the blade cut into several strips. Then through each guide roller to A, B winding shaft to stop the winding products. The slitting machine is driven by the main motor, the rubber roller and the receiving shaft work synchronously.

Assuming that the tension is controlled steadily, the slitting machine can prevent the raw material from deforming and drifting in the process of increasing and decreasing the speed of the machine. It will form the sum of the troublesome and non-reeling tension for the next process. Most of the previous slitting machines of the slitting machine use magnetic powder clutch to control the tension, but the speed of the magnetic particle clutch can not be high, and the slitting machine is easy to form a high-speed conflict of magnetic powder when it is running, and the slitting machine is now mostly selected vector frequency conversion motor to control the tension system of the slitting machine, and the pendulum roller is actively detected, and the man-machine is made of low temperature, and the slitting machine shortens its lifespan, and it will be stuck when it is severe, so that the operation of the machine is blocked.